Hot Air Blowers
Hot Air Blowers, High Pressure Blowers,Medium Pressure Blowers, Pressure Blowers, High Vacuum Blowers
Hot air can be used for various applications, ranging from heating a space to drying coatings and parts.
Normally Medium Pressure/High Pressure/Vacuum Blowers(Also known as Regenerative / Side Channel / Turbine / Vortex Blowers) are associated with medium pressure and vacuum applications. However now specially built Higher Pressure / Vacuum Blowers are available for such applications.
Power Rating : | - |
Maximum Flow : | - |
Maximum Pressure : | - |
Maximum Vacuum : | - |
USEFUL CONVERSIONS DATA:
- 1 Mbar= 0.402 in H2O = 10.2mm H2O=0.0295 in.Hg=0.75 mm Hg = 0.0145 psi =100 Pa=10 daPa = 100 N/m2 = 0.750 Torr
- 1 M3/Hr.= 0.588 CFM.= 35.31 Ft3/Hr = 16.67 L/Min
- 1 KW = 1.34 HP = 1000 W
USEFUL CONVERSIONS LINK:
Features Of Blowers
Hot Air Blowers / Ring Blowers / Side Channel Blowers / Regenerative Blowers / Turbine Blowers / Vortex Blowers / Vacuum Blowers / Medium Pressure Blowers /High Pressure Blowers / High Vacuum Blower / Ring Compressor / Lateral Channel Blowers Data Summary
The Hot Air Blowers / Ring Blowers / Side Channel Blowers / Regenerative Blowers / Turbine Blowers / Vortex Blowers / Vacuum Blowers / High Pressure Blowers / High Vacuum Blower / Ring Compressor / Lateral Channel Blowers are suitable for all those applications requiring considerably higher pressure, than those which can be achieved using centrifugal fans. Side Channel exhausters are used in all those applications requiring an operating vacuum higher than the one achievable by a fan, but not as to require the use of a vacuum pump. The rotating parts are not in contact with the casing. There is, therefore, no friction during operation and thus no internal lubrication is necessary.
Hot Air Blowers with inlet air temperature below 70deg. C. and direct mounting are compact in construction, and run with high-speed motors.� Such blowers are mostly used for better mixing of fresh air to the furnace for a better combustion.
The other main features are:
- Higher Pressure Ratio
- 100% Oil-Free Continuous High Pressure Air Flow
- Blower Can Be Used For Pressure Or Vacuum Applications
- Low Noise Level (65dba Normal, 85 dba Max.)
- 110% Overload Protection
- ±10% Voltage Fluctuation Tolerance
- Rated For Continuous 24 X 7 Duty
- IP 55 Protection
- Class F Insulation
- Motor Design compatible with VFD Drive For Easily Accommodating Operating Condition Changes
- Impeller Directly Mounted on Motor Shaft Eliminates Maintenance Issues Like Change Of Gears, Pulleys, Belts
- Pressure Die Casted Aluminum Alloy Body, Impeller & Rotor
- Dust Proof Polymer Shaft Seal
- Low Temperature Rise
- Pulsation- Free Discharge
- Light And Compact But Sturdy Aesthetically Appealing Design
- CNC Machined For Close Tolerances And Better Performance
- Dynamically Balanced Impeller Assembly For Longer Vibrations Free Life
- High Temperature Grease Filled And Double Sealed NSK/SKF Bearings
- For Trouble Free Operation For Long Periods
- Space Efficient Easy Installation In Vertical Or Horizontal Position
- With Built In Inlet And Outlet Silencers
- Minimal And Simple Maintenance
- Suitable For Environmental Protection