Ring Compressor
Ring Blowers / Side Channel Blowers / Regenerative Blowers / Turbine Blowers / Vortex Blowers / Vacuum Blowers / High Pressure Blowers / High Vacuum Blower / Ring Compressor / Lateral Channel Blowers
The Ring Compressor are suitable for all those applications requiring considerably higher pressure, than those which can be achieved using centrifugal blower.
Power Rating : | 0.20kw To 25kw |
Maximum Flow : | 2050 M3/hr |
Maximum Pressure : | 670 Mbar |
Maximum Vacuum : | 460 Mbar |
USEFUL CONVERSIONS DATA:
- 1 Mbar= 0.402 in H2O = 10.2mm H2O=0.0295 in.Hg=0.75 mm Hg = 0.0145 psi =100 Pa=10 daPa = 100 N/m2 = 0.750 Torr
- 1 M3/Hr.= 0.588 CFM.= 35.31 Ft3/Hr = 16.67 L/Min
- 1 KW = 1.34 HP = 1000 W
USEFUL CONVERSIONS LINK:
Features Of Blowers
Ring Blowers / Side Channel Blowers / Regenerative Blowers / Turbine Blowers / Vortex Blowers / Vacuum Blowers / High Pressure Blowers / High Vacuum Blower / Ring Compressor / Lateral Channel Blowers Data Summary
The Ring Blowers / Side Channel Blowers / Regenerative Blowers / Turbine Blowers / Vortex Blowers / Vacuum Blowers / High Pressure Blowers / High Vacuum Blower / Ring Compressor / Lateral Channel Blowers are suitable for all those applications requiring considerably higher pressure, than those which can be achieved using centrifugal fans. Side Channel exhausters are used in all those applications requiring an operating vacuum higher than the one achievable by a fan, but not as to require the use of a vacuum pump. The rotating parts are not in contact with the casing. There is, therefore, no friction during operation and thus no internal lubrication is necessary.
Ring Compressor Blower is a non-positive displacement, high volume, low pressure blower that can operate as either a compressor or a vacuum pump.
It is also known by other names such as: regenerative blower, vortex blower, and side-channel blower.
All of the names describe the basic principle of operation of the blower.
The other main features are:
- Higher Pressure Ratio
- 100% Oil-Free Continuous High Pressure Air Flow
- Blower Can Be Used For Pressure Or Vacuum Applications
- Low Noise Level (65dba Normal, 85 dba Max.)
- 110% Overload Protection
- ±10% Voltage Fluctuation Tolerance
- Rated For Continuous 24 X 7 Duty
- IP 55 Protection
- Class F Insulation
- Motor Design compatible with VFD Drive For Easily Accommodating Operating Condition Changes
- Impeller Directly Mounted on Motor Shaft Eliminates Maintenance Issues Like Change Of Gears, Pulleys, Belts
- Pressure Die Casted Aluminum Alloy Body, Impeller & Rotor
- Dust Proof Polymer Shaft Seal
- Low Temperature Rise
- Pulsation- Free Discharge
- Light And Compact But Sturdy Aesthetically Appealing Design
- CNC Machined For Close Tolerances And Better Performance
- Dynamically Balanced Impeller Assembly For Longer Vibrations Free Life
- High Temperature Grease Filled And Double Sealed NSK/SKF Bearings
- For Trouble Free Operation For Long Periods
- Space Efficient Easy Installation In Vertical Or Horizontal Position
- With Built In Inlet And Outlet Silencers
- Minimal And Simple Maintenance
- Suitable For Environmental Protection
Application Of Blowers
The Ring Blowers / Side Channel Blowers / Regenerative Blowers / Turbine Blowers / Vortex Blowers / Vacuum Blowers / High Pressure Blowers / High Vacuum Blower / Ring Compressor / Lateral Channel Blowers are suitable for very wide field of application some of them are
Turbine Blowers / Vacuum Blowers - Data Summary
RING BLOWERS DATA FOR GENERAL APPLICATIONS
TD-3: For 220AC / 50Hz / 1 phase Model Click here
TD-4: For 115VAC / 50Hz / 1 Phase Model Click here
The Ring Blowers / Side Channel Blowers / Regenerative Blowers / Turbine Blowers are suitable for all those applications requiring considerably higher pressure, than those which can be achieved using centrifugal fans. Side Channel exhausters are used in all those applications requiring an operating vacuum higher than the one achievable by a fan, but not as to require the use of a vacuum pump. The rotating parts are not in contact with the casing. There is, therefore, no friction during operation and thus no internal lubrication is necessary. The other main features are: